Foundry Networks FGS648P-POE Manuale Utente Pagina 82

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 96
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 81
FastIron GS Compact Layer 2 Switch Hardware Installation Guide
7 - 14 © 2007 Foundry Networks, Inc. September 2007
Figure 7.9 shows the location of the POE daughter cards on the main board of the FGS648P-POE.
Figure 7.9 Installing a POE Daughter Card in the FGS648P-POE
4. Re-assemble the device as instructed in the section “Re-assembling the Chassis” .
5. Power ON the chassis and observe the console. The following message will appear:
Info: PoE module detected in slot 1. Initializing....
6. Enable POE and configure POE parameters. See the Foundry FastIron Configuration Guide for information.
Re-assembling the Chassis
This section provides instructions for re-assembling the FGS device after removing, installing, or replacing a 10-
GbE module.
1. Replace the device’s cover by gently guiding the cover into place.
2. Once the cover is properly positioned, re-fasten the screws on each side of the cover.
3. If the device is rack-mounted, replace the mounting brackets.
POE Daughter Cards
Vedere la pagina 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 95 96

Commenti su questo manuale

Nessun commento